How to Download and Use the Align 3GX Anleitung Deutsch PDF Manual
If you are looking for a comprehensive guide to setting up and flying your RC helicopter with the Align 3GX flybarless system, you might want to download the Align 3GX Anleitung Deutsch PDF manual. This manual is written in German and contains detailed instructions and diagrams for installing, configuring, and operating the 3GX system. In this article, we will show you how to download and use the Align 3GX Anleitung Deutsch PDF manual.
align 3gx anleitung deutsch pdf download
Download Zip: https://tlniurl.com/2tNiu0
What is Align 3GX?
Align 3GX is a 3-axis gyro system for RC helicopters that simulates the stability of a flybar head and allows for high agility for 3D flight. It uses high-reliability MEMS gyro sensors and a 12-bit processor for high-precision control. It supports Spektrum and JR satellite receivers, Futaba S.BUS technology, and software upgrade via PC interface adapter. It has a simple setup process with only 5 steps and 2 sensitivity settings. It is compatible with all CCPM swashplate types and mechanical mixing systems. It also has an integrated speed governor function. It is suitable for all helicopters regardless of size and power source, from Align T-REX 250 to T-REX 700 .
How to Download the Align 3GX Anleitung Deutsch PDF Manual?
The Align 3GX Anleitung Deutsch PDF manual is available for download from the official Align website. Here are the steps to download it:
Go to https://www.align.com.tw/index.php/download-en/3gx/
Scroll down to the bottom of the page and find the section \"Manuals\".
Click on the link \"ALIGN 3GX Flybarless System Manual (German)\".
A new window will open with the PDF file. You can view it online or save it to your computer.
How to Use the Align 3GX Anleitung Deutsch PDF Manual?
The Align 3GX Anleitung Deutsch PDF manual is divided into several sections, each covering a different aspect of the 3GX system. Here are some tips on how to use the manual:
The first section is an introduction that explains the features and specifications of the 3GX system.
The second section is a setup guide that shows you how to install and connect the 3GX system to your helicopter and transmitter.
The third section is a flybarless setup guide that shows you how to adjust the swashplate settings, speed governor settings, rudder settings, and flight mode settings.
The fourth section is a troubleshooting guide that helps you solve some common problems with the 3GX system.
The fifth section is an appendix that contains some additional information and diagrams.
The manual also includes a pitch gauge tool that helps you measure and adjust the pitch angle of your blades.
The manual uses LED indicators, buttons, and sounds to guide you through the setup process. Make sure you follow the instructions carefully and check the LED status before proceeding to the next step.
The manual also provides some examples of transmitter settings for different types of helicopters and radios. You can use them as a reference or modify them according to your preference.
How to Install and Connect the Align 3GX System?
The Align 3GX system consists of a main unit, a sensor unit, a USB interface adapter, and a pitch gauge tool. You will also need a compatible receiver, transmitter, servos, and ESC. The installation and connection process is as follows:
Mount the main unit on the helicopter frame with double-sided tape. Make sure the unit is level and secure. Avoid mounting it near sources of vibration or heat.
Mount the sensor unit on the helicopter frame with double-sided tape. Make sure the unit is aligned with the main shaft and the arrow points to the nose of the helicopter. Avoid mounting it near sources of magnetic interference or heat.
Connect the servos to the main unit according to the labels on the ports. The servo on the right side of the frame is AIL, the middle one is ELE, and the left one is PIT. Do not exchange AIL and PIT connections, otherwise some compensation features may be reversed.
Connect the ESC to the main unit according to the labels on the ports. The ESC signal wire goes to THR port, and the ESC power wires go to BATT port.
Connect the receiver to the main unit according to your receiver type and layout. The 3GX system supports standard parallel channel layout, Futaba S.BUS system, and Spektrum/JR satellite receivers. Refer to the manual for detailed wiring diagrams.
Connect the USB interface adapter to the main unit and your computer. You can use it to upgrade the software or adjust some parameters of the 3GX system.
How to Adjust the Swashplate Settings?
The swashplate settings include mechanical travel and neutral point setting, swashplate type recognition and endpoint setting, servo type setting, and direction reversal setting. The swashplate settings are done by entering the setup mode and following the LED indicators and sounds on the main unit. Here are the steps to adjust the swashplate settings:
Turn on your transmitter and set all trims, subtrims, endpoints, and mixing values to zero or default. Set your throttle curve and pitch curve to 0-50-100.
Press and hold the SET button on the main unit while powering on the helicopter. Release the SET button before LEDs stop scrolling. The LED1 will light up indicating you have entered setup mode.
Adjust your transmitter's subtrim function until all three servos are at 90 degrees angle with their respective linkages.
Adjust your transmitter's swashplate mixing function (pitch swash AFR) until you get a maximum collective pitch of +/-12 degrees for 3D flight or +/-10 degrees for normal flight.
Press SET button once to enter swashplate type recognition mode. The LED1 will flash indicating you have entered this mode.
Move your cyclic stick (AIL/ELE) to any corner position and hold it there until you hear two beeps from 3GX system.
The 3GX system will automatically detect your swashplate type (120/140/90 degree CCPM or mechanical mixing) and set the endpoints accordingly. You can check your swashplate type by counting how many times LED1 flashes after detection (1 flash for 120 degree CCPM, 2 flashes for 140 degree CCPM, 3 flashes for 90 degree CCPM, 4 flashes for mechanical mixing).
Press SET button once to enter servo type setting mode. The LED2 will light up indicating you have entered this mode.
Select your servo type by moving your throttle stick up or down. Move it up for digital servos or down for analog servos. You will hear one beep for digital servos or two beeps for analog servos.
Press SET button once to enter direction reversal setting mode. The LED3 will light up indicating you have entered this mode.
Select your direction reversal for ELE by moving your cyclic stick forward or backward. Move it forward for normal direction or backward for reversed direction. You will hear one beep for normal direction or two beeps for reversed direction.
Select your direction reversal for AIL by moving your cyclic stick left or right. Move it left for normal direction or right for reversed direction. You will hear one beep for normal direction or two beeps for reversed direction.
Select your direction reversal for PIT by moving your collective stick up or down. Move it up for normal direction or down for reversed direction. You will hear one beep for normal direction or two beeps for reversed direction.
How to Adjust the Speed Governor Settings?
The speed governor settings include the throttle and mechanical travel range setting, the speed setting, and the activation and safety setting. The speed governor settings are done by entering the setup mode and following the LED indicators and sounds on the main unit. Here are the steps to adjust the speed governor settings:
Turn on your transmitter and set your throttle curve and pitch curve to 0-50-100.
Confirm your transmitter is powered up and your throttle stick is at the lowest position.
Press and hold the SET button on the main unit while powering on the helicopter until all LED1-5 light up. Release the SET button and GOV red LED will light up indicating you have entered setup mode.
Push your throttle stick on your transmitter to the maximum top position and hold it there until you hear two beeps from 3GX system.
The 3GX system will automatically detect your throttle and mechanical travel range and set it accordingly. The LED will go off and system power cycles indicating you have completed this mode.
Connect wires and install sensor magnet on your motor as shown in the diagram. Make sure the sensor is aligned with the magnet and secured with double-sided tape.
When using standard parallel channel layout or S.BUS system to connect the 3GX, speed setting is done through channel 7. Turning channel 7 on or off will enable or disable governor function. When satellite receivers are used, speed setting is done through channel 5.
The 3GX system has four preset speed settings: 50%, 60%, 70%, and 80% of maximum motor RPM. You can select your desired speed setting by moving your collective stick up or down. You will hear one beep for 50%, two beeps for 60%, three beeps for 70%, and four beeps for 80%.
The 3GX GOV LED will light up green when governor is active, red when inactive. You can check your governor status by looking at the LED.
The 3GX system has a throttle safety feature built in. If throttle is not lowered to minimum during 3GX startup, governor function will not activate. Restart the 3GX with throttle lowered all the way down.
The following two requirements must be met in order for governor to activate: (1) Governor switched on. (2) Throttle position is at 30% or higher.
How to Adjust the Rudder Settings?
The rudder settings include servo neutral pulse width setting, endpoint setting, direction reversal setting, delay setting, and sensitivity setting. The rudder settings are done by entering the setup mode and following the LED indicators and sounds on the main unit. Here are the steps to adjust the rudder settings:
Turn on your transmitter and set your rudder subtrim, endpoints, and exponential to zero or default.
Push and hold the SET button for 2 seconds to enter the rudder gyro setup mode while 3GX is turned on. The LED1-5 will flash indicating you have entered setup mode.
Select your servo neutral pulse width by moving your throttle stick up or down. Move it up for 1520us or down for 760us. You will hear one beep for 1520us or two beeps for 760us.
Select your direction reversal for rudder by moving your rudder stick left or right. Move it left for normal direction or right for reversed direction. You will hear one beep for normal direction or two beeps for reversed direction.
Select your endpoint for rudder by moving your rudder stick left or right until you reach the maximum mechanical travel of your tail rotor without binding. Press SET button once to confirm each endpoint. You will hear one beep after each confirmation.
Select your delay for rudder by moving your collective stick up or down. Move it up to increase delay or down to decrease delay. You will hear one beep for each increment or decrement of delay value.
Select your sensitivity for rudder by moving your cyclic stick left or right. Move it left to increase sensitivity or right to decrease sensitivity. You will hear one beep for each increment or decrement of sensitivity value.
Conclusion
The Align 3GX Anleitung Deutsch PDF manual is a valuable resource for RC helicopter enthusiasts who want to learn how to install, configure, and operate the Align 3GX flybarless system. The manual covers all the aspects of the 3GX system, from the features and specifications, to the installation and connection, to the swashplate, speed governor, and rudder settings. The manual also provides troubleshooting tips and additional information. The manual is written in German and can be downloaded from the official Align website. By following the instructions and diagrams in the manual, you can enjoy the benefits of the 3GX system, such as improved stability, agility, performance, and flight time. d282676c82
https://www.powerandpoise.org/group/mysite-231-group/discussion/541d1bd7-0f33-45ba-ab7e-e618932c7475
https://www.lion-design.co.uk/group/mysite-200-group/discussion/73c2df5a-9187-416f-86c5-a0c1c1af4325
https://www.mysilyyum.com/group/mysite-231-group/discussion/62a3e37c-2f75-4958-813c-b24114dd8a47